Magnetek/Parallax 6300/7300 Upgrade Kit
  PowerMax Boondocker Converters
  Iota DLS Converters
  Progressive Dynamics Converters
  WFCO Converters
  WFCO 8955 Main Board Assembly
  Parallax Magnetek Converters
  Parallax Paramode with TempAssure
  Airstream Univolt
  Centurion CS3000 Replacement
  American CS6000 Converter
  Elixir Replacement Converter
  Showroom Vehicle DC Power Supply
  Magnum Energy Inverters
  Xantrex TrueCharge2 Chargers
  Xantrex Pure Sine Wave Inverters
  Xantrex Freedom 458 Inverter/Chargers
  Samlex Pure Sine Wave Inverters
  WFCO Pure Sine Wave Inverters
  Inverter Class T Fuses
  Xantrex Echo Charge
  Powerhouse Generators
  Dinosaur Electronics
  SeeLevel Gauges
  AGM Batteries
  TriMetric Battery Monitor
  Xantrex Link Battery Monitor
  Kill A Watt EZ
  Voltminder
  Ultra Trik-L-Start
  Toad-Charge
  RV Power Outlets
  Battery Boxes
  Battery Cable
  Circuit Breakers and Fuses
  Transfer Switches
  Distribution Panels
  Solar Chargers
  Shunts
  Battery Disconnects
  240 Volt Converters
  Battery Chargers
  Automatic Load Shed
  12 Volt LED Interior Lighting
  Desulfators
  Books
  Scratch and Dent
  Pressure Pro
  Samlex Solar
  Zamp Solar
  Rugged Force Converters
BR100 BR100 Battery Disconnect
PH2700PRi Powerhouse PH2700PRi Inverter Generator
PH2100PRi Powerhouse PH2100PRi Inverter Generator
0 item(s) in your cart / Total: $0.00 View Cart Checkout
Home > Progressive Dynamics Converters > 4300 Series Power Center (30 Amp Service)
30 Amp Power Center with 60 Amp Converter/Charger
Part Number PD4360
30 Amp Power Center with 60 Amp Converter/Charger
Email this page to a friend Email this page to a friend
Price
Your Price:  
$270.00
Availability:
In Stock
Quantity
Description

Inteli-Power AC Features:

 

Accepts up to 7 branch circuit breakers when using split breakers.

 

AC Panel features 12 built-in push and lock strain relief wiring connectors for quick installation. Saves over 50% on installation cost.

 

Vertical or horizontal mounting choices.
 
Other PD4300 Series Features:
  • Reverse battery protection
  • Electronic current limiting
  • Low line voltage protection
  • Intelligent cooling fan
  • High voltage protection
  • Automatic thermal protection
  • Press open door for easy access to circuit breakers
  • Front access to large wiring compartment
Housing Features:
  • Snap lock cover stays shut while traveling. Opens with a touch.
  • Attractive design with fine textured finish.
  • Special formulation plastic is very durable and engineered for use in higher temperature applications.

 

Attractive light weight panel design made from impact-resistant high temperature polymers.

 

Note: 30 AMP main breaker and AC breakers are not included and shown for reference only.
 

Inteli-Power DC Features:

Top two fuse holders recommended for low current devices such as smoke detectors and carbon monoxide detectors.

12 Branch fuse holders with maximum rating of 20 AMPS each.

Optional L.E.D. indicators identify which fuse is blown.

Converter/Charger section is accessible from the front.

Converter/Charger ratings of 45 and 60 AMP.

Easy access reverse battery protection fuses.

Optional DC Ground Buss can be user-installed in the DC wiring compartment.
 

Inteli-Power 4300 Series models can recharge the battery to 90% in 2-3 hours using our patented Charge Wizard technology.

 

The built-in Charge Wizard automatically selects one of four operating modes: BOOST, NORMAL, STORAGE, DESULFATION.

 

BOOST Mode 14.4 Volts - Rapidly brings RV battery up to 90% of full charge. In the BOOST mode the Charge Wizard status indicator stays on.

 

NORMAL Mode 13.6 Volts - Safely completes the charge. In the NORMAL mode the Charge Wizard status indicator flashes once every second.

 

STORAGE Mode 13.2 Volts - Maintains charge with minimal gassing or water loss. In the STORAGE mode the Charge Wizard status indicator flashes once every 8 seconds.

 

DESULFATION Mode 14.4 Volts every 21 hours for a period of 15 minutes to prevent battery stratification. In the DESULFATION mode the Charge Wizard status indicator stays on.
 
Maximum DC Output Current 45-AMPS 60-AMPS
Maximum Continuous Input Power 725 WATTS 1,000 WATTS
No Load DC Output Voltage 13.6 VDC 13.6 VDC
No Load Voltage Tolerance +/- .3 VDC +/- .3 VDC
Full Load Output Voltage > 12.6 VDC > 12.6 VDC
Ripple and Noise Voltage <50 MV RMS <50 MV RMS
Input Voltage Tolerance 105 - 130 VAC 105 - 130 VAC
Input Voltage Frequency 50-60 HZ 50-60 HZ
Peak Inrush Current 32-AMPS 47-AMPS
Efficiency (Typical) > 80% > 80%
Reverse Battery Protection YES YES
Electronic Current Limiting YES YES
Cooling Fan Auto-variable speed Auto-variable speed
Back Up Thermal Protection YES YES
Full Function Charge Wizard YES YES
Storage Temperature 20-80C 20-80C
Operating Temperature 0-50C 0-50C
Hipot Voltage Test <-------- 1240 V @ INPUT TERMINALS -------->
Over Voltage Protection YES YES
Under Voltage Protection YES YES
Weight 10 LBS. 10 LBS.
Cutout Size 10.125W x 13.25H 10.125W x 13.25H
Dimensions 11.85W x 14.125H x 8.5D 11.85W x 14.125H x 8.5D
UL & c UL Listed YES YES
     
AC Distribution Specs:    
Rating 120 VAC/30 AMPS 120 VAC/30 AMPS
Breakers Max. 30 AMP Main... Up to 7 Branch Circuits
     
DC Distribution Specs:    
DC Fuse Positions 12/18 12/18
Blown Fuse Indicators Optional Optional
Ground Bar Optional Optional