Magnetek/Parallax 6300/7300/8300 Upgrade Kits
  Boondocker Converters
  Boondocker Main Board Assembly for WFCO 8955
  Progressive Dynamics Inteli-Power Converters
  WFCO Converters
  WFCO 8955 AN (P) and PEC Replacement Converters
  Airstream Converters and More
  TriMetric Battery Monitor
  Iota DLS Converters
  Parallax Magnetek Converters
  Centurion CS 3000 Replacement
  Elixir Replacement Converter
  American/Centurion CS 6000 Converter
  Pop Up and Small Camper Converters
  Zamp Solar
  RV Surge Protectors
  RV Power Protection EMS
  Parallax Paramode with TempAssure
  Lithium Battery Converter Chargers
  Samlex EVO Inverter Chargers
  Samlex Pure Sine Wave Inverters
  Xantrex TrueCharge2 Chargers
  Xantrex Pure Sine Wave Inverters
  Xantrex Freedom 458 Inverter/Chargers
  Specialty Converters
  Bowfishing Converters
  PowerAll Jump Start and Charger
  WFCO Pure Sine Wave Inverters
  Inverter Class T Fuses
  Distribution Panels
  DC Fuse Panels
  Transfer Switches
  Water Pumps
  SeeLevel Gauges
  AGM Batteries
  Dinosaur Electronics
  Circuit Breakers and Fuses
  RV Outdoor Power Outlets
  Solar Charger Maintainers
  Adapters Plugs Receptacles
  Shunts
  Battery Disconnects
  Battery Minder Battery Chargers
  Automatic Load Shed
  12 Volt LED Interior Lighting
  Books
  Pressure Pro
  24 Volt Converters
  48 Volt Converters
  240 VAC Converters (European)
  Marine Battery Chargers
  Spendide Washer/Dryer Repair
  Optimate Chargers
ZS-EX-160-DX Deluxe 160 Watt Solar Expansion Kit – ZS-EX-160-DX
ZS-EX-100-DX Deluxe 100 Watt Solar Expansion Kit – ZS-EX-100-DX
ZS-320-30A-DX Zamp Solar Deluxe 320 Watt RV Solar Kit
ZS-240-30A-L Zamp Slim Line Airstream 240 Watt 30 Amp Solar RV Kit ZS-240-30A-L
PD9170AL PD9170AL 70 Amp, 12 volt, Lithium Ion Converter/Charger
0 item(s) in your cart / Total: $0 View Cart Checkout
Home > TriMetric Battery Monitor

Trimetric 2030A Battery System Monitor

Part NumberTM2030A
Trimetric 2030A Battery System Monitor
Email this page to a friend Email this page to a friend
Price
Your Price:
$147.50
Availability:
In Stock
Bookmark and Share
Choose Options and Quantity
Shunt
100 Amp [+$27.00]
500 Amp [+$27.00]
None
Cable
35 Ft. Meter to Shunt Cable [+$29.00]
None
Quantity
Description

The TriMetric TM-2030 is our new battery monitor. It is a standalone monitor, but it can also work in tandem with our new SC-2030 charge controller for optimized battery life, capacity use and efficiency. TriMetric TM-2030 is available in two models:TM-2030-RV and TM-2030-A. Our older models (TM-2025 and TM-2020) are still supported.

The TriMetric is used to monitor battery systems used in remote homes, RVs or boats that have batteries that store solar, wind, or possibly generator powered chargers. They will help you maintain your batteries. 

All models are designed to monitor the following:

  • “Percent Full” (“State of charge”) of your batteries, so you can see if you need to charge them more, or check that overall usage is less than your charging resources.
  • Volts of the batteries, for example to check that they are being charged at proper voltage.
  • Energy going in, or out of your batteries, measured in amps or watts, so you can see that your charging sources are charging properly, or how much current your loads are using.
  • How many days since the batteries were fully charged: to remind you to not wait too long between fully charging your batteries to maximize their life.

The TM2030 is easier for you to program the necessary system parameters.

  • The TM2030 has some minimal data logging, which can be useful for a technician to diagnose some common setup or operational problems with battery systems.
  • The TM-2030 will operate with (nominal) battery systems from 12 to 48V. The TM-2020 will operate with 12 or 24 V systems, but requires the addition of the “TM-48VA” Adapter and lightning protection board when using it with 48V battery systems. This also provides lightning protection for the TM-2020.
  • The TM-2030 can also monitor the voltage only of a second battery, such as a starting battery, or possibly also the input voltage of a solar array (if less than 100 volts.)
  • The TM-2030 has a “simplified” level of operation suitable for most users, but can be configured for more flexibility (and complexity) where occasionally required.
  • (For the technically knowledgeable only) The TM-2030 has a serial data output of all the “real time” data—which could be used to access data for other control or output in, for example OEM applications.
  • The newer TM-2030 includes better lightning protection compared with the TM-2020.
  • It is easier to view and enter programmed parameters..
  • It is about typically about $15 more than the TM-2020. For 48V systems it is less expensive than the TM-2020 because it does not require an extra 48 volt adapter.