Offering superior quality sine wave output, the Xantrex Sine Wave Inverter XS400 (part#806-0400) is designed specifically to power entertainment systems in boats and recreational vehicles. Its clean utility-grade output will not produce noise and distortion on TVs, VCRs, DVDs and stereos. The Xantrex XS400 supplies up to 400 watts of continuous power and with a surge rating of 800 watts, it can power complete entertainment systems including two 27” televisions.

The Xantrex XS400's robust electronic design includes a built-in transfer switch that automatically transfers between inverter power and incoming AC power. The inverter comes standard with dual AC outlets and AC hardwire connections that increase installation options and safety.

Product Features

• 400 watt inverter with 800 watt surge provides sufficient power for two entertainment systems
• Filtered sine wave output eliminates distortion on sensitive electronics
• Built-in transfer switch automatically transfers between inverter power and incoming AC power
• DSP control technology starts complex loads with ease
• Dual AC outlets and hardwire AC connections
• CSA/NTRL certified to UL458 and CSA 107.1
• Remote panel
• One year warranty

Protection Features

• Battery over-voltage and under-voltage protection
• Over temperature shutdown
• Automatic overload protection
• Short circuit protection
• Ground fault protection (GFCI)

Electrical Specifications
	Output power		400 watts
	Surge rating (5 seconds)		800 watts
	Output current (peak)		10A
	Output voltage (at no load)		120 VAC -/+3 V
	Output voltage (over full load and battery voltage range)		120 VAC RMS -/+5 V
	Output frequency		60.0 -/+ 0.05 Hz
	Output waveform		Sine wave (<3% THD)
	Peak efficiency		0.88
	No load power draw		<15 W
	Power draw in standby mode		0 watts
	Input operating voltage range		10.3 - 15.3 VDC
	Transfer relay rating		6A
	General Specifications
	Operating temperature range		32°F - 104°F (0°C - 40°C), derated linearly to 300 watts at 122°F (50°C)
	Storage temperature range		-22°F - 158°F (-30°C - 70°C)
	AC receptacle		Dual, three-prong GFCI receptacle and hardwire on front of unit
	Recommended DC fuse		80 A
	Dimensions (HxWxD)		3.7 x 7.4 x 13.5” (83 x 187 x 343 mm)
	Weight		10.0 lb (4.6 kg)
	Remote switch		Included with unit (808-2400)
	Part numbers		806-0400 Single unit packaging (1 per box)
	Regulatory Approvals
	CSA/NRTL certified to UL 458 and CSA C22.2 No. 107.1
	EMC: FCC Class B
Note: Specifications subject to change without notice.