DLS 240-55 (240 VAC)

Your Price: $255.00

Part Number: DLS 220-55

Availability: In Stock

Quantity

Description

The DLS-220-55 Power Converter/Battery Charger from IOTA Engineering converts nominal 220-240 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 55 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-220-55 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

SPECIFICATIONS
DC Output Voltage (No Load) approx.	13.6V (DC)
Output Voltage Tolerance (No Load)	+ or - .7%
Output Amperage, Max Continuous	55 Amps
Output Voltage (Full Load) approx.	>13.4V (DC)
Maximum Power Output, Continuous	750 Watts
Ripple and Noise	<50 mV rms
Input Voltage Range	220-240V (AC)
Input Voltage Frequency	47-63
Maximum AC Current @ 108VAC	6.5 Amps
Typical Efficiency	>80%
Max Inrush Current, Single Cycle	27 Amps
Short Circuit Protection	Yes
Overload Protection	>100%
Line Regulation	100 mV rms
Load Regulation	<1.5%
Fan Control	Proportional
Thermal Protection	YES
Working Temperature Range	0-40C
Storage Temperature	-20 to 80C
Withstand Voltage	1240V @ leads
Dimensions	9.7" x 6.7" x 3.4"
Weight	5.0 lbs