The AC Distribution Panel is rated for 240 VAC @ 50 AMPS.
Provisions for up to 12 branch breakers (breakers not included).
Center feed dual 50 AMP main breaker (not included).
AC Panel features 12 built-in push and lock strain relief wiring connectors for quick installation. Saves over 50% on installation cost.
Vertical or horizontal mounting choices.
Attractive light weight panel design made from impact-resistant high temperature polymers.
Note: AC Breakers are not included and shown for reference only.
Top two fuse holders recommended for low current devices such as smoke detectors and carbon monoxide detectors.
18 Branch fuse holders with maximum rating of 20 AMP.
Optional L.E.D. indicators identify which fuse is blown.
Converter/Charger section is accessible from the front.
Converter/Charger ratings of 60, 75 and 90 AMP, which is the largest rating available in the industry.
Easy access reverse battery protection fuses.
Optional DC Ground Buss can be user-installed in the DC wiring compartment.
Other PD4500 Series Features:
- Reverse battery protection
- Electronic current limiting
- Low line voltage protection
- Intelligent cooling fan
- High voltage protection
- Automatic thermal protection
- Press open door for easy access to circuit breakers
- Front access to large wiring compartment
Inteli-Power 4500 Series models can recharge the battery to 90% in 2-3 hours using our patented Charge Wizard technology.
The built-in Charge Wizard automatically selects one of four operating modes: BOOST, NORMAL, STORAGE, DESULFATION.
BOOST Mode 14.4 Volts - Rapidly brings RV battery up to 90% of full charge. In the BOOST mode the Charge Wizard status indicator stays on.
NORMAL Mode 13.6 Volts - Safely completes the charge. In the NORMAL mode the Charge Wizard status indicator flashes once every second.
STORAGE Mode 13.2 Volts - Maintains charge with minimal gassing or water loss. In the STORAGE mode the Charge Wizard status indicator flashes once every 8 seconds.
DESULFATION Mode 14.4 Volts every 21 hours for a period of 15 minutes to prevent battery stratification. In the DESULFATION mode the Charge Wizard status indicator stays on.
| Maximum DC Output Current | 60-AMPS | 75-AMPS | 90-AMPS |
| Maximum Continuous Input Power | 1,000 WATTS | 1,300 WATTS | 1,550 WATTS |
| No Load DC Output Voltage | 13.6 VDC | 13.6 VDC | 13.6 VDC |
| No Load Voltage Tolerance | +/- .3 VDC | +/- .3 VDC | +/- .3 VDC |
| Full Load Output Voltage | > 12.6 VDC | > 12.6 VDC | > 12.6 VDC |
| Ripple and Noise Voltage | <100 MV RMS | <100 MV RMS | <100 MV RMS |
| Input Voltage Tolerance | 105 - 130 VAC | 105 - 130 VAC | 105 - 130 VAC |
| Input Voltage Frequency | 50-60 HZ | 50-60 HZ | 50-60 HZ |
| Peak Inrush Current | 47-AMPS | 80-AMPS | 80-AMPS |
| Input Current at Rated Power | ˜11.4-AMPS | ˜17.7-AMPS | ˜17.7-AMPS |
| Efficiency (Typical) | > 80% | > 80% | > 80% |
| Reverse Battery Protection | YES | YES | YES |
| Electronic Current Limiting | YES | YES | YES |
| Cooling Fan | Auto-variable speed | Auto-variable speed | Auto-variable speed |
| Back Up Thermal Protection | YES | YES | YES |
| Full Function Charge Wizard | YES | YES | YES |
| Storage Temperature | -20-80C | -20-80C | -20-80C |
| Operating Temperature | 0-50C | 0-50C | 0-50C |
| Hipot Voltage Test | <-------- 1240 V @ INPUT TERMINALS --------> |
| Over Voltage Protection | YES | YES | YES |
| Under Voltage Protection | YES | YES | YES |
| Weight | 8 LBS. | 8.5 LBS. | 10 LBS. |
| Cutout Size | 10.125W x 13.25H | 10.125W x 13.25H | 10.125W x 13.25H |
| Dimensions | 11.85W x 14.125H x7.8D | 11.85W x 14.125H x 7.8D | 11.85W x 14.125H x 7.8D |
 | YES | YES | YES |
| AC Distribution Specs: |
| Rating (maximum input) | 240 VAC/50 AMPS | 240 VAC/50 AMPS | 240 VAC/50 AMPS |
| Rating (maximum output) | 120 VAC/50 AMPS | 120 VAC/50 AMPS | 120 VAC/50 AMPS |
| Breakers | Max. 50 AMP Main... Up to 12 Branch Circuits |
| DC Distribution Specs: |
| DC Fuse Positions | 12/18 | 12/18 | 12/18 |
| Blown Fuse Indicators | Yes | Yes | Yes |
| Ground Bar | Yes | Yes | Yes |
| DC Disconnect | Yes | Yes | Yes
|